banner_page

MAX942MSA/PR

Surface Mount Tube 80 ns μs Linear Comparators 300nA pA 2014 500μA μA 3mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX942MSA/PR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 686
  • Description: Surface Mount Tube 80 ns μs Linear Comparators 300nA pA 2014 500μA μA 3mV mV Surface Mount (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tube
Published 2014
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Comparator
Max Power Dissipation 727mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 3V
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number MAX942
Pin Count 8
Output Type CMOS, TTL
Number of Elements 1
Power Supplies 3/5V
Number of Channels 2
Nominal Supply Current 500μA
Power Dissipation 471mW
Max Supply Current 500μA
Response Time 80 ns
Common Mode Rejection Ratio 81.94 dB
Voltage - Supply, Single/Dual (±) 2.5V~11V ±1.25V~5.5V
Input Offset Voltage (Vos) 3mV
Average Bias Current-Max (IIB) 0.4μA
Power Supply Rejection Ratio (PSRR) 81.94dB
Supply Voltage Limit-Max 6.5V
Input Bias Current 300nA
Current - Quiescent (Max) 3.2μA
Voltage - Input Offset (Max) 10mV @ 5V
Propagation Delay (Max) 12μs
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

MAX942MSA/PR Overview


To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, TTL output.This chip is designed with the Tube package.You can find 8 terminals of the comparator.Electronic comparator is a part of Comparator family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator consists of 1 elements in total.The board includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -55°C~125°C .8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX942 .The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 500μA .An excess of current supply over 500μA could result in malfunction of the comparator.A power supply of 3/5V is sufficient for the operation of the device.The output quality of 2 channels is maintained by cooperating with each other.

MAX942MSA/PR Features


CMOS, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -55°C~125°C

MAX942MSA/PR Applications


There are a lot of Maxim Integrated MAX942MSA/PR linear comparators applications.

  • Security Detection Systems
  • Window Comparators, Multivibrators
  • Wearable Devices
  • Industrial
  • Limit Comparators
  • Consumer Medical Electronics
  • Window Comparators
  • Notebooks and PDAs
  • Wireless Base Stations
  • Power management

Write a review

Note: HTML is not translated!
    Bad           Good