MAX944CPD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | MAX944 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Power Supplies | 3/5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 600μA |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 6.5V |
| Max Input Current | 150nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Propagation Delay (Max) | 80ns |
| Length | 19.05mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX944CPD+ Overview
A convenient packaging is provided in the form of 14-DIP (0.300, 7.62mm) .Output type CMOS, Push-Pull, TTL is used for this comparator.This device is designed in Tube case.The comparator has a total of 14 terminals.The electrical component in this case belongs to the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.Electronic comparator includes 14 pins.The recommended mounting type is Through Hole .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.The comparator has 14 pins.Alternatively, you may search for MAX944 to find more pin-to-pin solutions for your specific needs.A quiescent current of 600μA is displayed by this comparator.A Through Hole is provided for mounting on PCBs or other boards.Normal operation of the device requires a nominal supply current of 500μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .A power supply of 3/5V is sufficient for the operation of the device.You are allowed to input a maximum current of 150nA into the device.
MAX944CPD+ Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 600μA
MAX944CPD+ Applications
There are a lot of Maxim Integrated MAX944CPD+ linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Power Supervision
- Portable and Battery-Powered Systems
- Wearable Devices
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Ultra-Low Power Systems
- Notebooks and PDAs
- Building automation
- System control and monitoring
