MAX944CSD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX944 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 600μA |
| Turn On Delay Time | 80 ns |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 150nA |
| Current - Quiescent (Max) | 600μA |
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX944CSD+T Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a CMOS, Push-Pull, TTL output type for this comparator.This chip is designed with the Tape & Reel (TR) package.There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparators families.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.A total of 4 elements can be found in it.As a result, it contains 14 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.14 pins are present on the comparator.You can find more pin-to-pin solutions by searching MAX944 .The comparator presents a quiescent current of 600μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .The nominal supply current of the device should be 500μA for normal use.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 500μA .In order to run the device, there are only 3/5V power supplies required.
MAX944CSD+T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 600μA
MAX944CSD+T Applications
There are a lot of Maxim Integrated MAX944CSD+T linear comparators applications.
- Mobile Phones
- General Purpose Low Voltage Applications
- RC Timers
- Window Comparators
- Threshold Detectors
- Automotive
- Hand-Held Electronics
- Building automation
- Security Detection Systems
- Wide Range VCO; MOS Clock Timers
