MAX944EPD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | MAX944 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 600μA |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 150nA |
| Current - Quiescent (Max) | 600μA |
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Length | 19.05mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX944EPD+ Overview
The product is packaged in 14-DIP (0.300, 7.62mm) for ease of transportation.This comparator is of the CMOS, Push-Pull, TTL output type.This package has been designed with Tube .Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a 3V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 4 elements in it.There are 14 pins on this board.Electronic comparator is recommended to mount using type Through Hole .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator has a pin count of 14 .You may wish to search MAX944 for more solutions that address your specific needs.There is a quiescent current of 600μA in this comparator.The PCB or other board has a Through Hole for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 500μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .In order to run the device, there are only 3/5V power supplies required.
MAX944EPD+ Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 600μA
MAX944EPD+ Applications
There are a lot of Maxim Integrated MAX944EPD+ linear comparators applications.
- Wireless Base Stations
- System control and monitoring
- Wearable Devices
- Analog front end
- DC/DC and AC/DC power supplies
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators
- Multivibrators and High-Voltage Digital Logic Gates
- Current and voltage sensing
- Factory automation & control
