MAX944ESD+
| Parameters | |
|---|---|
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 667mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX944 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 600μA |
| Max Supply Current | 600μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 600μA |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 150nA |
MAX944ESD+ Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Push-Pull, TTL .This device is designed in Tube case.14 terminals are found on the comparator.The electrical component in this case belongs to the Comparators family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 4 elements.The device contains 14 pins.A Surface Mount mounting type is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 14 pins.In order to find a solution that meets your specific needs, search MAX944 for more pin-to-pin solutions.There is a quiescent current of 600μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 600μA .If the current supply exceeds 600μA , the comparator could malfunction.The device can be powered by 3/5V power supplies.
MAX944ESD+ Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 600μA
MAX944ESD+ Applications
There are a lot of Maxim Integrated MAX944ESD+ linear comparators applications.
- Hand-Held Electronics
- Zero-Crossing Detectors
- Laptop Computers
- Battery-Powered Electronics
- Threshold Detectors
- Mobile Communications
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
- High-Speed Differential Line Receiver
- Handheld Instruments
