banner_page

MAX9485EUP+

3.3V Clock Generator 73.728MHz MAX9485 Clock Generators 20 Pins 20-TSSOP (0.173, 4.40mm Width) 20 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX9485EUP+
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 888
  • Description: 3.3V Clock Generator 73.728MHz MAX9485 Clock Generators 20 Pins 20-TSSOP (0.173, 4.40mm Width) 20 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 190.990737mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2008
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type Clock Generator
Terminal Finish Matte Tin (Sn)
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number MAX9485
Output LVCMOS, LVTTL
Pin Count 20
Number of Outputs 3
Operating Supply Voltage 3.3V
Number of Circuits 1
Operating Supply Current 12mA
Frequency (Max) 73.728MHz
Input LVCMOS, LVTTL, Crystal
Ratio - Input:Output 1:3
Primary Clock/Crystal Frequency-Nom 27MHz
PLL Yes
Differential - Input:Output No/No
Max Duty Cycle 55 %
Divider/Multiplier Yes/No
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX9485EUP+ Overview


Tube-method packaging is used for clock ICs. Embedded in the 20-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains 20 terminations that can be found in frequency synthesizer. The supply voltage of 3.3V allows for high efficiency. There is a Clock PLL called LVCMOS, LVTTL, Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. It provides a maximum frequency of 73.728MHz. With the Surface Mount, it is easy to install this electric component on the panel. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. LVCMOS, LVTTL is designed for clock generator's output. An electrical part such as this one can be classified as a Clock Generator component. This clock-generating IC is a 20-bit device designed explicitly for microprocessors. The related electrical components for the base part number MAX9485 can be found below. It is possible to connect to the frequency generators via 20 pins. In terms of the supply voltage, PLL clock can handle 3.3V volts. 3 signal outputs maximi3e the output frequency. For the RF synthesizer to function properly, a supply current of 12mA must be provided.

MAX9485EUP+ Features


Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

MAX9485EUP+ Applications


There are a lot of Maxim Integrated MAX9485EUP+ Clock Generators applications.

  • Wi-Fi routers
  • Tracking filters
  • Deep space exploration
  • Multiplexing communication
  • Fiber Channel
  • Reference signals to RF systems
  • Test equipment
  • Line cards used in telephone exchange
  • Antenna automatic tracking
  • Pulsed digital systems

Write a review

Note: HTML is not translated!
    Bad           Good