MAX9601EUP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Max Power Dissipation | 879mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9601 |
| Pin Count | 20 |
| Output Type | Complementary, Differential, PECL |
| Number of Circuits | 2 |
| Max Supply Voltage | 6.3V |
| Min Supply Voltage | 4.3V |
| Nominal Supply Current | 27mA |
| Output Current | 50mA |
| Max Supply Current | 27mA |
| Propagation Delay | 500 ps |
| Quiescent Current | 27mA |
| Turn On Delay Time | 500 ps |
| Common Mode Rejection Ratio | 65 dB |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Dual Supply Voltage | 5V |
| Input Bias Current | 6μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 5mV @ -5.2V 5V |
| Current - Input Bias (Max) | 6μA @ -5.2V5V |
| Hysteresis | 30mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 65dB PSRR |
| Current - Output (Typ) | 50mA |
| Propagation Delay (Max) | 0.5ns |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9601EUP+ Overview
The product is packaged in 20-TSSOP (0.173, 4.40mm Width) for ease of transportation.Output type Complementary, Differential, PECL is used for this comparator.As a result, it is designed with Tube package.You can find 20 terminals of the comparator.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as with Latch .Electronic comparator has 20 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 20 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9601 .This comparator presents a quiescent current of 27mA .The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 27mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 27mA .A comparator's maximum supply voltage is 6.3V volts.A voltage of 4.3V is the minimum supply voltage allowed by this comparator.
MAX9601EUP+ Features
Complementary, Differential, PECL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 27mA
MAX9601EUP+ Applications
There are a lot of Maxim Integrated MAX9601EUP+ linear comparators applications.
- Window Comparators, Multivibrators
- Simple Analog-to-Digital Converters (ADCs)
- General-Purpose Portable Devices
- Metering Systems
- Consumer Medical Electronics
- Power management
- Mobile Communications
- Power Supervision
- Window Comparators
- Analog front end
