MAX9602EUG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Max Power Dissipation | 975mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9602 |
| Pin Count | 24 |
| Output Type | Complementary, Differential, PECL |
| Number of Circuits | 4 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 1V |
| Nominal Supply Current | 10mA |
| Output Current | 50mA |
| Max Supply Current | 10mA |
| Propagation Delay | 500 ps |
| Quiescent Current | 39mA |
| Common Mode Rejection Ratio | 65 dB |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Max Input Current | 6μA |
| Input Bias Current | 20μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 5mV @ -5.2V 5V |
| Current - Input Bias (Max) | 6μA @ -5.2V5V |
| Hysteresis | 30mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 65dB PSRR |
| Current - Output (Typ) | 50mA |
| Propagation Delay (Max) | 0.5ns |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9602EUG+ Overview
In order to facilitate transportation, it is packaged in 24-TSSOP (0.173, 4.40mm Width) .A comparator with a Complementary, Differential, PECL output is used here.This device is designed in Tube case.24 terminals are found on the comparator.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .Electronic comparator has 24 pins.A Surface Mount mounting type is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.Electronic comparator has 24 pins.Alternatively, you may search for MAX9602 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 39mA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 10mA .A current supply greater than 10mA may result in the comparator malfunctioning.The maximal current your can input into the device is 6μA .There is a maximum voltage supply on the comparator of 5V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 1V .
MAX9602EUG+ Features
Complementary, Differential, PECL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 39mA
MAX9602EUG+ Applications
There are a lot of Maxim Integrated MAX9602EUG+ linear comparators applications.
- Automotive
- Security Detection Systems
- Body Control Modules
- Lithium ion battery monitoring
- Limit Comparators
- Infotainment & cluster
- General-Purpose, Low-Voltage Applications
- Factory automation & control
- Building automation
- Set Top Boxes
