MAX9602EUG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 975mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9602 |
| Pin Count | 24 |
| Output Type | Complementary, Differential, PECL |
| Number of Elements | 4 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 1V |
| Nominal Supply Current | 10mA |
| Output Current | 50mA |
| Max Supply Current | 10mA |
| Propagation Delay | 500 ps |
| Quiescent Current | 39mA |
| Common Mode Rejection Ratio | 65 dB |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Max Input Current | 6μA |
| Input Bias Current | 20μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 5mV @ -5.2V 5V |
| Current - Input Bias (Max) | 6μA @ -5.2V5V |
| Hysteresis | 30mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 65dB PSRR |
| Propagation Delay (Max) | 0.5ns |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9602EUG+T Overview
For convenience, it is packaged in 24-TSSOP (0.173, 4.40mm Width) .The comparator has a Complementary, Differential, PECL output.This package has been designed with Tape & Reel (TR) .The comparator has a total of 24 terminals.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.It's a typical General Purpose comparator.There are a total of 4 elements in it.Electronic comparator includes 24 pins.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 24 pins.Try search MAX9602 to get more pin-to-pin solutions for your special needs.This comparator presents a quiescent current of 39mA .The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 10mA .The compartator could be damaged if the current supply exceeds 10mA .Electronic comparator is possible to input up to 6μA current into the device.The maximal supply voltage of the comparator is 5V .Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 1V .
MAX9602EUG+T Features
Complementary, Differential, PECL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 39mA
MAX9602EUG+T Applications
There are a lot of Maxim Integrated MAX9602EUG+T linear comparators applications.
- Zero-Crossing Detectors
- Infotainment & cluster
- Industrial
- Notebooks and PDAs
- System control and monitoring
- General-Purpose, Low-Voltage Applications
- Automatic Test Equipment
- Pulse, Squarewave, and Time Delay Generators
- Factory automation & control
- High-Speed Sampling Circuits
