MAX9618AXA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TFSOP (0.049, 1.25mm Width) |
| Number of Pins | 8 |
| Manufacturer Package Identifier | X8CN+1 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Gold (Au) - with Nickel (Ni) barrier |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 245mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9618 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Operating Supply Current | 59μA |
| Nominal Supply Current | 59μA |
| Output Current | 150mA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 122 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V ±0.8V~2.75V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 800nV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 160dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.8μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height Seated (Max) | 1.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX9618AXA+T Overview
In the package, you will find a 8-TFSOP (0.049, 1.25mm Width)-case to contain the op amp ic. Zero-Drift-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. Please take in mind that this instrumentation amplifier should be run at 3.3V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 800nV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using a supply current of 59μA , this buffer op amp will be able to operate. 160dB should remain the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. TAPE AND REEL is adopted to pack the instrumentation amplifier.
MAX9618AXA+T Features
supply voltage of 3.3V
160dB voltage gain
Output Type: Rail-to-Rail
MAX9618AXA+T Applications
There are a lot of Maxim Integrated MAX9618AXA+T Instrumentational OP Amps applications.
- Biopotential
- Oscilloscopes
- pH (acidity)
- Video amplifiers
- Polarized electrodes
- Video conversion and routing
- Fast A/D and D/A converters
- Signal amplification
- single/dual op amp sum and difference circuits
- Signal filtering
