MAX961ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX961 |
| Pin Count | 8 |
| Output Type | CMOS, Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 11mA |
| Max Supply Current | 11mA |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 11mA |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1.5mV |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 15μA |
| Input Bias Current | 15μA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 15μA @ 5V |
| Hysteresis | 3.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 7ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX961ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with a CMOS, Complementary, TTL output is used here.This chip is designed with the Tape & Reel (TR) package.You can find 8 terminals of the comparator.Electronic comparator is a part of Comparators family.A comparator supplied with 3V voltage can complete many demanding tasks.The type of the chip can be classified as General Purpose .The total number of elements is 1 .Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 8 pins.If you require more pin-to-pin solutions, search MAX961 for more options.The comparator displays a quiescent current of 11mA .There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires 11mA supply current.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 11mA .The device can be run with 3/5V power supplies.You are allowed to input a maximum current of 15μA into the device.The part belongs to the series of comparator Beyond-the-Rails? .
MAX961ESA+T Features
CMOS, Complementary, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 11mA
MAX961ESA+T Applications
There are a lot of Maxim Integrated MAX961ESA+T linear comparators applications.
- Appliances
- Infotainment and Clusters
- Motor drives
- Power Supervision
- Point of load regulators
- High-Speed Sampling Circuits
- Battery-Powered Electronics
- Handheld Instruments
- Battery-Powered Electronics
- DC/DC and AC/DC power supplies
