MAX961EUA+
| Parameters | |
|---|---|
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX961 |
| Pin Count | 8 |
| Output Type | CMOS, Complementary, TTL |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 11mA |
| Max Supply Current | 11mA |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 11mA |
| Turn On Delay Time | 4.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1.5mV |
| Average Bias Current-Max (IIB) | 30μA |
| Input Bias Current | 15μA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 15μA @ 5V |
| Hysteresis | 3.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 7ns |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
MAX961EUA+ Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a CMOS, Complementary, TTL output type for this comparator.This chip is designed with the Tube package.The comparator has 8 terminals.Other Comparators like the device play a important role in the industry.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .In terms of type, this is a typical General Purpose comparator.A total of 8 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 8 pins.Try search MAX961 to get more pin-to-pin solutions for your special needs.There is 11mA current flowing in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires 11mA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 11mA .The part is based on Beyond-the-Rails? .The normal operation of the system requires 5V operating voltage.
MAX961EUA+ Features
CMOS, Complementary, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 11mA
MAX961EUA+ Applications
There are a lot of Maxim Integrated MAX961EUA+ linear comparators applications.
- Hand-Held Electronics
- Mobile Communications
- Point of load regulators
- Simple Analog-to-Digital Converters (ADCs)
- Laptop Computers
- Battery management and protection
- General Purpose Low Voltage Applications
- Window Comparators
- Industrial
- Automatic Test Equipment
