Parameters |
Published |
2012 |
Series |
Beyond-the-Rails™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX961 |
Pin Count |
8 |
Output Type |
CMOS, Complementary, TTL |
Number of Elements |
1 |
Power Supplies |
3/5V |
Nominal Supply Current |
11mA |
Max Supply Current |
11mA |
Propagation Delay |
4.5 ns |
Quiescent Current |
11mA |
Response Time |
4.5 ns |
Common Mode Rejection Ratio |
86.02 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Input Offset Voltage (Vos) |
1.5mV |
Average Bias Current-Max (IIB) |
30μA |
Supply Voltage Limit-Max |
5.5V |
Input Bias Current |
15μA |
Voltage - Input Offset (Max) |
1.5mV @ 5V |
Current - Input Bias (Max) |
15μA @ 5V |
Hysteresis |
3.5mV |
CMRR, PSRR (Typ) |
80dB CMRR, 86.02dB PSRR |
Propagation Delay (Max) |
7ns |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
MAX961EUA+T Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has an output type of CMOS, Complementary, TTL .The part is shipped by Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a part of Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Electronic comparator is possible to classify the chip as General Purpose .A total of 1 elements can be found in it.The device contains 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator is equipped with 8 pins.You can search MAX961 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 11mA .Mounting on PCBs or other boards is easy with the Surface Mount .For normal use of the device, the nominal supply current should be 11mA .A current supply greater than 11mA may result in the comparator malfunctioning.There is sufficient power to run the device from 3/5V power supplies.This part is from the Beyond-the-Rails? comparator series.
MAX961EUA+T Features
CMOS, Complementary, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 11mA
MAX961EUA+T Applications
There are a lot of Maxim Integrated MAX961EUA+T linear comparators applications.
- Threshold Detectors
- Notebooks and PDAs
- Battery-Powered Electronics
- Portable and Battery-Powered Systems
- System control and monitoring
- Mobile Phones and Tablets
- Current and voltage sensing
- DC/DC and AC/DC power supplies
- Metering Systems
- Ultra-Low Power Systems