MAX9620AXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX9620 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Operating Supply Current | 59μA |
| Nominal Supply Current | 59μA |
| Output Current | 150mA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 122 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V ±0.8V~2.75V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 800nV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 160dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.8μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00008μA |
| Programmable Power | NO |
| Power | NO |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX9620AXK+T Overview
It is packaged in an 5-TSSOP, SC-70-5, SOT-353-case that protects the operational amplifiers from damage. This is a Zero-Drift type op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 5. Please take in mind that this instrumentation amplifier should be run at 3.3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 5 pins are included on the operational amplifiers. The input offset voltage is 800nV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 59μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 160dB for the time being. On the buffer amps, there are 1 channels that can be used. On the output type, there are Rail-to-Rail different types of op amps. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
MAX9620AXK+T Features
supply voltage of 3.3V
160dB voltage gain
Output Type: Rail-to-Rail
MAX9620AXK+T Applications
There are a lot of Maxim Integrated MAX9620AXK+T Instrumentational OP Amps applications.
- Large motor controllers
- Voltage regulation circuit
- Subtraction operation circuits
- earphone
- Medical imaging
- Inverse/same-phase proportional circuit
- Switching amplifier
- Multiplication circuits
- High/low-pass filter circuit
- Logarithmic operation circuits
