MAX962ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX962 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 8mA |
| Max Supply Current | 9mA |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 9mA |
| Turn On Delay Time | 4.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1.5mV |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 15μA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 15μA @ 5V |
| Hysteresis | 3.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 7ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX962ESA+T Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, TTL output.Ready for shipping in Tape & Reel (TR) package.The comparator has a total of 8 terminals.The chip belongs to Comparators .A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.It's a typical General Purpose comparator.This element consists of 2 elements in total.As a result, it contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator consists of 8 pins.You can search MAX962 if you are looking for more pin-to-pin solutions.A quiescent current of 9mA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 8mA .A current supply greater than 9mA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.The part belongs to the series of comparator Beyond-the-Rails? .
MAX962ESA+T Features
CMOS, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 9mA
MAX962ESA+T Applications
There are a lot of Maxim Integrated MAX962ESA+T linear comparators applications.
- DC/DC and AC/DC power supplies
- RC Timers
- Limit Comparators
- Hand-Held Electronics
- High-Speed Sampling Circuits
- Body Control Modules
- High-Speed Differential Line Receiver
- Industrial
- Battery-Powered Electronics
- Pulse, Squarewave, and Time Delay Generators
