MAX962EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX962 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 8mA |
| Max Supply Current | 9mA |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 9mA |
| Turn On Delay Time | 4.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1.5mV |
| Average Bias Current-Max (IIB) | 30μA |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 15μA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 15μA @ 5V |
| Hysteresis | 3.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 7ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX962EUA+T Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type CMOS, TTL is used for this comparator.We ship the part through Tape & Reel (TR) .There are 8 terminals on the comparator.The electrical component here belongs to the Comparators family.In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a General Purpose chip.This element consists of 2 elements in total.The device includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.Try search MAX962 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 9mA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .For normal use of the device, the nominal supply current should be 8mA .A current supply greater than 9mA may cause the comparator to malfunction.3/5V power supplies are enough to run the device.The part is based on Beyond-the-Rails? .
MAX962EUA+T Features
CMOS, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 9mA
MAX962EUA+T Applications
There are a lot of Maxim Integrated MAX962EUA+T linear comparators applications.
- Appliances
- Zero-Crossing Detectors
- Mobile Communications
- RC Timers
- Body Control Modules
- Battery-Powered Electronics
- Factory automation & control
- High-Speed Sampling Circuits
- Wireless Base Stations
- Security Detection Systems
