MAX9637AXA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TFSOP (0.049, 1.25mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9637 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Operating Supply Current | 36mA |
| Nominal Supply Current | 36μA |
| Output Current | 40mA |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.1V~5.5V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 124dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Screening Level | AEC-Q100 |
| Power | NO |
| Height Seated (Max) | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX9637AXA+T Overview
The linear amplifier is packaged in a 8-TFSOP (0.049, 1.25mm Width) case. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 3.3V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. The input offset voltage is 10μV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 36mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 124dB is the best course of action. 2 channels are available on the instrumentation amplifier. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. TAPE AND REEL is adopted to pack the instrumentation amplifier.
MAX9637AXA+T Features
8 Pins
supply voltage of 3.3V
124dB voltage gain
Output Type: Rail-to-Rail
MAX9637AXA+T Applications
There are a lot of Maxim Integrated MAX9637AXA+T Instrumentational OP Amps applications.
- Test and measurement instruments
- Measurements of Wheatstone bridge
- PDA
- Automation control systems
- Cinema or auditorium audio system
- Ultrasound transducers
- Multimedia playback equipment
- Vehicle electronics
- Laptop
- Professional videography
