MAX964EEE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX964 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 8mA |
| Max Supply Current | 9mA |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 9mA |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1.5mV |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 15μA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 15μA @ 5V |
| Hysteresis | 3.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 7ns |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX964EEE+T Overview
The product is packaged in 16-SSOP (0.154, 3.90mm Width) for ease of transportation.The comparator has a type CMOS, TTL output.As a result, it is designed with Tape & Reel (TR) package.Electronic comparator is possible to find the 16 terminals of the comparator.Other Comparator like the device play a important role in the industry.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 4 elements in total.The board includes 16 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 16 pins on the comparator.You can find more pin-to-pin solutions by searching MAX964 .As a result, this comparator displays a quiescent current of 9mA .The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 8mA when using the device.An excess of current supply over 9mA could result in malfunction of the comparator.The device can be run with 3/5V power supplies.The part is based on Beyond-the-Rails? .
MAX964EEE+T Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 9mA
MAX964EEE+T Applications
There are a lot of Maxim Integrated MAX964EEE+T linear comparators applications.
- Zero-Crossing Detectors
- Window Comparators
- Battery-Powered Electronics
- RC Timers
- Analog front end
- DC/DC and AC/DC power supplies
- High-Speed Sampling Circuits
- Multivibrators and High-Voltage Digital Logic Gates
- Point of load regulators
- Portable and Battery-Powered Systems
