Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
Series |
Beyond-the-Rails™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
696mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Base Part Number |
MAX964 |
Pin Count |
16 |
Output Type |
CMOS, TTL |
Number of Elements |
4 |
Power Supplies |
3/5V |
Nominal Supply Current |
8mA |
Max Supply Current |
9mA |
Propagation Delay |
4.5 ns |
Quiescent Current |
9mA |
Turn On Delay Time |
4.5 ns |
Response Time |
4.5 ns |
Common Mode Rejection Ratio |
86.02 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Input Offset Voltage (Vos) |
1.5mV |
Supply Voltage Limit-Max |
5.5V |
Input Bias Current |
15μA |
Voltage - Input Offset (Max) |
1.5mV @ 5V |
Current - Input Bias (Max) |
15μA @ 5V |
Hysteresis |
3.5mV |
CMRR, PSRR (Typ) |
80dB CMRR, 86.02dB PSRR |
Propagation Delay (Max) |
7ns |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX964ESE+T Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the CMOS, TTL output type.This chip is designed with the Tape & Reel (TR) package.As you can see, the comparator has16 terminals.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .A comparator of this type is typically of type General Purpose .There are a total of 4 elements in it.A total of 16 pins are included.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has a pin count of 16 .Try search MAX964 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 9mA .A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 8mA for normal use.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 9mA .This device requires 3/5V power supplies to operate.This part is from the Beyond-the-Rails? comparator series.
MAX964ESE+T Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 9mA
MAX964ESE+T Applications
There are a lot of Maxim Integrated MAX964ESE+T linear comparators applications.
- Notebooks and PDAs
- Power Supervision
- Hand-Held Electronics
- Self-diagnostics
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Mobile Phones and Tablets
- RC Timers
- Current and voltage sensing
- Motor drives