MAX965EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX965 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 7μA |
| Max Supply Current | 7μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 12μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 50nA |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 12μA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX965EUA+ Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a comparator of type Open-Drain, Rail-to-Rail output on this device.As a result, it is designed with Tube package.The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparators family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a with Voltage Reference chip.There are a total of 1 elements in it.A total of 8 pins are included.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX965 .The comparator displays a quiescent current of 12μA .The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 7μA supply current.A current supply greater than 7μA may cause the comparator to malfunction.You are allowed to input a maximum current of 50nA into the device.
MAX965EUA+ Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 12μA
MAX965EUA+ Applications
There are a lot of Maxim Integrated MAX965EUA+ linear comparators applications.
- Power Supervision
- Zero-Crossing Detectors
- Laptop Computers
- Set Top Boxes
- RC Timers
- Body Control Modules
- Handheld Instruments
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- DC/DC and AC/DC power supplies
