Parameters |
Type |
with Voltage Reference |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
471mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX965 |
Pin Count |
8 |
Output Type |
Open-Drain, Rail-to-Rail |
Number of Elements |
1 |
Nominal Supply Current |
7μA |
Max Supply Current |
7μA |
Propagation Delay |
20 μs |
Quiescent Current |
12μA |
Response Time |
20000 ns |
Common Mode Rejection Ratio |
56.48 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Input Offset Voltage (Vos) |
7mV |
Average Bias Current-Max (IIB) |
0.05μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
50nA |
Input Bias Current |
50nA |
Current - Quiescent (Max) |
12μA |
Voltage - Input Offset (Max) |
15mV @ 5.5V |
Current - Input Bias (Max) |
0.05μA @ 5.5V |
Hysteresis |
±1mV |
CMRR, PSRR (Typ) |
56.48dB CMRR, 80dB PSRR |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
MAX965EUA+T Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with an output type of Open-Drain, Rail-to-Rail is being used.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.The chip belongs to Comparators .In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as with Voltage Reference .The total number of elements is 1 .Electronic comparator includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.This comparator has 8 pins.Search MAX965 to find more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 12μA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 7μA when using the device.An excess of current supply over 7μA could result in malfunction of the comparator.You are allowed to input a maximum current of 50nA into the device.
MAX965EUA+T Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 12μA
MAX965EUA+T Applications
There are a lot of Maxim Integrated MAX965EUA+T linear comparators applications.
- Automatic Test Equipment
- Power management
- Zero-Crossing Detectors
- Consumer Medical Electronics
- Analog front end
- Handheld Instruments
- Factory automation & control
- Battery-Powered Electronics
- Laptop Computers
- Set Top Boxes