MAX966ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX966 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 6μA |
| Max Supply Current | 6μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 10μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 50nA |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 10μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX966ESA+ Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Open-Drain, Rail-to-Rail output type for this comparator.We ship the part through Tube .There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.The type of the chip can be classified as General Purpose .Currently, it consists of only 2 elements.The pinout of the component starts from 8 pins it has.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .Alternatively, you may search for MAX966 to find more pin-to-pin solutions for your specific needs.The comparator displays a quiescent current of 10μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current of the device be 6μA .If the current supply exceeds 6μA , the comparator could malfunction.The device can be run with 1.5/5.5V power supplies.Input current to the device is limited to 50nA .
MAX966ESA+ Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 10μA
MAX966ESA+ Applications
There are a lot of Maxim Integrated MAX966ESA+ linear comparators applications.
- Industrial
- Zero-Crossing Detectors
- DC/DC and AC/DC power supplies
- Hand-Held Electronics
- Motor drives
- Point of load regulators
- Battery-Powered Electronics
- Pulse, Squarewave, and Time Delay Generators
- Factory automation & control
- High-Speed Sampling Circuits
