MAX966ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX966 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 6μA |
| Max Supply Current | 6μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 10μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 10μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX966ESA+T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a Open-Drain, Rail-to-Rail output is used here.This chip is designed with the Tape & Reel (TR) package.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical General Purpose .There are a total of 2 elements in it.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.You may wish to search MAX966 for more solutions that address your specific needs.There is a quiescent current of 10μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 6μA .If the current supply exceeds 6μA , the comparator could malfunction.The device can be powered by 1.5/5.5V power supplies.
MAX966ESA+T Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 10μA
MAX966ESA+T Applications
There are a lot of Maxim Integrated MAX966ESA+T linear comparators applications.
- Lithium ion battery monitoring
- High-Speed Differential Line Receiver
- Set Top Boxes
- Power management
- Self-diagnostics
- Ultra-Low Power Systems
- Handheld Instruments
- Limit Comparators
- Motor drives
- Metering Systems
