MAX966EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX966 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 6μA |
| Max Supply Current | 6μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 10μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 50nA |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 10μA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX966EUA+ Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.This comparator is of the Open-Drain, Rail-to-Rail output type.Electronic comparator is shipped by Tube .You can find 8 terminals of the comparator.The electrical component here belongs to the Comparator family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical General Purpose .The total number of elements is 2 .The device contains 8 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX966 .A quiescent current of 10μA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current be 6μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 6μA .In order to run the device, there are only 1.5/5.5V power supplies required.Input current to the device cannot exceed 50nA .
MAX966EUA+ Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 10μA
MAX966EUA+ Applications
There are a lot of Maxim Integrated MAX966EUA+ linear comparators applications.
- Infotainment and Clusters
- Zero-Crossing Detectors
- Battery-Powered Electronics
- Set Top Boxes
- System control and monitoring
- Motor drives
- Battery management and protection
- High-Speed Sampling Circuits
- Consumer Medical Electronics
- Pulse, Squarewave, and Time Delay Generators
