Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
471mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Base Part Number |
MAX967 |
Pin Count |
8 |
Output Type |
Open-Drain, Rail-to-Rail |
Number of Elements |
2 |
Power Supplies |
1.5/5.5V |
Nominal Supply Current |
10μA |
Max Supply Current |
10μA |
Propagation Delay |
20 μs |
Quiescent Current |
16μA |
Response Time |
20000 ns |
Common Mode Rejection Ratio |
56.48 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Input Offset Voltage (Vos) |
7mV |
Average Bias Current-Max (IIB) |
0.005μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
50nA |
Current - Quiescent (Max) |
16μA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
0.05μA @ 5.5V |
Hysteresis |
±1mV |
CMRR, PSRR (Typ) |
56.48dB CMRR, 80dB PSRR |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX967ESA+ Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is Open-Drain, Rail-to-Rail .This package has been designed with Tube .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .The type of the chip can be classified as with Voltage Reference .A total of 2 elements can be found in it.The device contains 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.Search MAX967 to find more pin-to-pin solutions.There is a quiescent current of 16μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 10μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 10μA .In order to run the device, there are only 1.5/5.5V power supplies required.
MAX967ESA+ Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
MAX967ESA+ Applications
There are a lot of Maxim Integrated MAX967ESA+ linear comparators applications.
- Motor drives
- Infotainment and Clusters
- Zero-Crossing Detectors
- Battery management and protection
- Metering Systems
- Power management
- Automotive
- Laptop Computers
- High-Speed Sampling Circuits
- Portable Battery Monitoring