MAX967EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX967 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 10μA |
| Max Supply Current | 10μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 16μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX967EUA+T Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) to facilitate transportation.The comparator has a type Open-Drain, Rail-to-Rail output.This device is designed in Tape & Reel (TR) case.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.This is a typical comparator of type with Voltage Reference .There are a total of 2 elements in it.Electronic comparator includes 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.If you require more pin-to-pin solutions, search MAX967 for more options.A quiescent current of 16μA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 10μA .If the current supply exceeds 10μA , the comparator might be damaged.The device can be run with 1.5/5.5V power supplies.
MAX967EUA+T Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
MAX967EUA+T Applications
There are a lot of Maxim Integrated MAX967EUA+T linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Appliances
- High-Speed Differential Line Receiver
- High-Speed Sampling Circuits
- Laptop Computers
- General Purpose Low Voltage Applications
- Automotive
- Battery management and protection
- General-Purpose, Low-Voltage Applications
- Window Comparators
