MAX968ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Window |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX968 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 10μA |
| Max Supply Current | 10μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 16μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 50nA |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX968ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.This comparator is of the Open-Drain, Rail-to-Rail output type.This device is designed in Tube case.The comparator has 8 terminals.Electronic comparator is a component of the Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .When it comes to types, this comparator is a typical Window .There are a total of 2 elements in it.The pinout of the component starts from 8 pins it has.Surface Mount universial mout for easy adapting.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search MAX968 for more pin-to-pin solutions.In this comparator, the quiescent current is 16μA .There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 10μA .If the current supply exceeds 10μA , the comparator could malfunction.In order to operate the device, 1.5/5.5V power supplies are sufficient.Input current to the device is limited to 50nA .
MAX968ESA+ Features
Open-Drain, Rail-to-Rail output capability
Window IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
MAX968ESA+ Applications
There are a lot of Maxim Integrated MAX968ESA+ linear comparators applications.
- Appliances
- General Purpose Low Voltage Applications
- Analog front end
- Industrial
- Body Control Modules
- Alarm and Monitoring Circuits
- Infotainment and Clusters
- Automotive
- Hand-Held Electronics
- Window Comparators
