MAX968ESA+T
| Parameters | |
|---|---|
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Window |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX968 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 10μA |
| Max Supply Current | 10μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 16μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 50nA |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 16μA |
MAX968ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with an output type of Open-Drain, Rail-to-Rail is being used.This device is designed in Tape & Reel (TR) case.There are8 terminals on the comparator.Electronic comparator is a component of the Comparators family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type Window .There are a total of 2 elements in it.The device includes 8 pins.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.Alternatively, you may search for MAX968 to find more pin-to-pin solutions for your specific needs.There is 16μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 10μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 10μA .In order to operate the device, 1.5/5.5V power supplies are sufficient.Input current to the device is limited to 50nA .
MAX968ESA+T Features
Open-Drain, Rail-to-Rail output capability
Window IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
MAX968ESA+T Applications
There are a lot of Maxim Integrated MAX968ESA+T linear comparators applications.
- Set Top Boxes
- Laptop Computers
- Motor drives
- Body Control Modules
- Window Comparators, Multivibrators
- Lithium ion battery monitoring
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Battery management and protection
- Battery-Powered Electronics
