Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Window |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
330mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX968 |
Pin Count |
8 |
Output Type |
Open-Drain, Rail-to-Rail |
Number of Elements |
2 |
Power Supplies |
1.5/5.5V |
Nominal Supply Current |
10μA |
Max Supply Current |
10μA |
Propagation Delay |
20 μs |
Quiescent Current |
16μA |
Response Time |
20000 ns |
Common Mode Rejection Ratio |
56.48 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Input Offset Voltage (Vos) |
15mV |
Average Bias Current-Max (IIB) |
0.05μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
50nA |
Current - Quiescent (Max) |
16μA |
Voltage - Input Offset (Max) |
15mV @ 5.5V |
Current - Input Bias (Max) |
0.05μA @ 5.5V |
Hysteresis |
±1mV |
CMRR, PSRR (Typ) |
56.48dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX968EUA+ Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with an output type of Open-Drain, Rail-to-Rail is being used.This chip is designed with the Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparators family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .In general, the chip type can be classified as Window .Electronic comparator consists of 2 elements in total.The device is equipped with 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 8 .Alternatively, you may search for MAX968 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 16μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 10μA when using the device.Current supply exceeding 10μA could cause disfunction of the compartator.Electronic comparator is sufficient to run the device wElectronic comparatorh 1.5/5.5V power supplies.
MAX968EUA+ Features
Open-Drain, Rail-to-Rail output capability
Window IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
MAX968EUA+ Applications
There are a lot of Maxim Integrated MAX968EUA+ linear comparators applications.
- Window Comparators, Multivibrators
- Infotainment and Clusters
- Power management
- Simple Analog-to-Digital Converters (ADCs)
- RC Timers
- Metering Systems
- General Purpose Low Voltage Applications
- Current and voltage sensing
- Lithium ion battery monitoring
- Limit Comparators