MAX968EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Window |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX968 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 10μA |
| Max Supply Current | 10μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 16μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX968EUA+T Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a Open-Drain, Rail-to-Rail output is used here.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparators families.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.In terms of type, this is a typical Window comparator.There are a total of 2 elements in it.The device includes 8 pins.The recommended mounting type is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.Search MAX968 to find more pin-to-pin solutions.There is a quiescent current of 16μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 10μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 10μA .The device can be powered by 1.5/5.5V power supplies.
MAX968EUA+T Features
Open-Drain, Rail-to-Rail output capability
Window IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
MAX968EUA+T Applications
There are a lot of Maxim Integrated MAX968EUA+T linear comparators applications.
- High-Speed Sampling Circuits
- Lithium ion battery monitoring
- Limit Comparators
- Handheld Instruments
- Zero-Crossing Detectors
- Alarm and Monitoring Circuits
- Ultra-Low Power Systems
- Security Detection Systems
- General Purpose Low Voltage Applications
- Set Top Boxes
