Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
471mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX9691 |
Pin Count |
8 |
Output Type |
Complementary, ECL |
Number of Circuits |
1 |
Max Supply Voltage |
10.5V |
Min Supply Voltage |
9.5V |
Nominal Supply Current |
26mA |
Output Current |
50mA |
Max Supply Current |
26mA |
Propagation Delay |
1.8 ns |
Quiescent Current |
26mA |
Response Time |
2 ns |
Common Mode Rejection Ratio |
80 dB |
Input Offset Voltage (Vos) |
6.5mV |
Neg Supply Voltage-Nom (Vsup) |
-5.2V |
Voltage Gain |
70dB |
Average Bias Current-Max (IIB) |
30μA |
Power Supply Rejection Ratio (PSRR) |
60dB |
Dual Supply Voltage |
-5.2V |
Input Bias Current |
20μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Voltage - Input Offset (Max) |
6.5mV @ 5V |
Current - Input Bias (Max) |
20μA @ 5V |
CMRR, PSRR (Typ) |
80dB CMRR, 60dB PSRR |
Current - Output (Typ) |
50mA |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9691ESA+ Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Complementary, ECL .As a result, it is designed with Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.Other Comparators like the device play a important role in the industry.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator is possible to classify the chip as with Latch .Electronic comparator includes 8 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX9691 .A quiescent current of 26mA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 26mA .An excess of current supply over 26mA could result in malfunction of the comparator.In accordance with the voltage formula, the part's voltage gain is 70dB .Compatibility is defined as 10.5V when the comparator is operating at its maximum supply voltage.This comparator allows minimum supply voltage of 9.5V .
MAX9691ESA+ Features
Complementary, ECL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB
MAX9691ESA+ Applications
There are a lot of Maxim Integrated MAX9691ESA+ linear comparators applications.
- RC Timers
- Window Comparators
- Alarm and Monitoring Circuits
- Threshold Detectors
- Simple Analog-to-Digital Converters (ADCs)
- Wide Range VCO; MOS Clock Timers
- Notebooks and PDAs
- Pulse, Squarewave, and Time Delay Generators
- Building automation
- System control and monitoring