MAX9691ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9691 |
| Pin Count | 8 |
| Output Type | Complementary, ECL |
| Number of Elements | 1 |
| Power Supplies | 5-5.2V |
| Max Supply Voltage | 10.5V |
| Min Supply Voltage | 9.5V |
| Nominal Supply Current | 26mA |
| Output Current | 50mA |
| Max Supply Current | 26mA |
| Propagation Delay | 1.8 ns |
| Quiescent Current | 26mA |
| Response Time | 2 ns |
| Common Mode Rejection Ratio | 60 dB |
| Input Offset Voltage (Vos) | 6.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Input Bias Current | 20μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 6.5mV @ 5V |
| Current - Input Bias (Max) | 20μA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 60dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9691ESA+T Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .There is a Complementary, ECL output type for this comparator.This package has been designed with Tape & Reel (TR) .You can find 8 terminals of the comparator.Other Comparators like the device play a important role in the industry.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type with Latch .This is a 1 element comparator.The pinout of the component starts from 8 pins it has.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 8 pins on the comparator.You may wish to search MAX9691 for more solutions that address your specific needs.In this comparator, the quiescent current is 26mA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current be 26mA in order to use the device normally.If the current supply exceeds 26mA , the comparator could malfunction.The device can be operated with 5-5.2V power supplies.A voltage gain of 70dB can be determined from the voltage formula for the part.Comparator electronics is specified that the comparator's maximum supply voltage is 10.5V .There is a minimum supply voltage of 9.5V for this comparator.
MAX9691ESA+T Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB
MAX9691ESA+T Applications
There are a lot of Maxim Integrated MAX9691ESA+T linear comparators applications.
- Zero-Crossing Detectors
- Point of load regulators
- Factory automation & control
- Consumer Medical Electronics
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Security Detection Systems
- Simple Analog-to-Digital Converters (ADCs)
- Power Supervision
- Infotainment & cluster
