banner_page

MAX9691EUA+

Surface Mount Tube 50mA mA 2 ns μs Linear Comparators 70dB dB 20μA pA 2012 26mA μA 6.5mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX9691EUA+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 940
  • Description: Surface Mount Tube 50mA mA 2 ns μs Linear Comparators 70dB dB 20μA pA 2012 26mA μA 6.5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Subcategory Comparators
Max Power Dissipation 330mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number MAX9691
Pin Count 8
Output Type Complementary, ECL
Number of Elements 1
Power Supplies 5-5.2V
Max Supply Voltage 10.5V
Min Supply Voltage 9.5V
Nominal Supply Current 26mA
Output Current 50mA
Max Supply Current 26mA
Propagation Delay 1.8 ns
Quiescent Current 26mA
Response Time 2 ns
Common Mode Rejection Ratio 60 dB
Input Offset Voltage (Vos) 6.5mV
Neg Supply Voltage-Nom (Vsup) -5.2V
Voltage Gain 70dB
Average Bias Current-Max (IIB) 30μA
Power Supply Rejection Ratio (PSRR) 60dB
Input Bias Current 20μA
Neg Supply Voltage-Max (Vsup) -6V
Voltage - Input Offset (Max) 6.5mV @ 5V
Current - Input Bias (Max) 20μA @ 5V
CMRR, PSRR (Typ) 80dB CMRR, 60dB PSRR
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2012
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Latch
Terminal Finish Matte Tin (Sn)

MAX9691EUA+ Overview


The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) to facilitate transportation.Output type Complementary, ECL is used for this comparator.The chip is packaged with Tube .There are 8 terminals on the comparator.Electronic comparator is a part of Comparators family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Speaking of types, this is a typical with Latch comparator.This is a 1 element comparator.The pinout of the component starts from 8 pins it has.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions by searching MAX9691 .This comparator presents a quiescent current of 26mA .The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 26mA .A current supply greater than 26mA may result in the comparator malfunctioning.The device can be powered by 5-5.2V power supplies.The voltage formula shows that the part has a voltage gain of 70dB .There is a maximum voltage supply on the comparator of 10.5V .A voltage of 9.5V is the minimum supply voltage allowed by this comparator.

MAX9691EUA+ Features


Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB

MAX9691EUA+ Applications


There are a lot of Maxim Integrated MAX9691EUA+ linear comparators applications.

  • RC Timers
  • Zero-Crossing Detectors
  • Infotainment & cluster
  • Metering Systems
  • Power management
  • Multivibrators and High-Voltage Digital Logic Gates
  • Mobile Phones
  • Infotainment and Clusters
  • Mobile Phones and Tablets
  • System control and monitoring

Write a review

Note: HTML is not translated!
    Bad           Good