MAX9691EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9691 |
| Pin Count | 8 |
| Output Type | Complementary, ECL |
| Number of Elements | 1 |
| Power Supplies | 5-5.2V |
| Max Supply Voltage | 10.5V |
| Min Supply Voltage | 9.5V |
| Nominal Supply Current | 26mA |
| Output Current | 50mA |
| Max Supply Current | 26mA |
| Propagation Delay | 1.8 ns |
| Quiescent Current | 26mA |
| Response Time | 2 ns |
| Common Mode Rejection Ratio | 60 dB |
| Input Offset Voltage (Vos) | 6.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Input Bias Current | 20μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 6.5mV @ 5V |
| Current - Input Bias (Max) | 20μA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 60dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9691EUA+T Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.A comparator with an output type of Complementary, ECL is being used.Electronic comparator is shipped by Tape & Reel (TR) .8 terminals are found on the comparator.Electronic comparator is a part of Comparators family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.It's a typical with Latch comparator.This is a 1 element comparator.Electronic comparator has 8 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Electronic comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX9691 .As a result, this comparator displays a quiescent current of 26mA .A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 26mA .A current supply greater than 26mA may result in the comparator malfunctioning.The device can be powered by 5-5.2V power supplies.Based on the voltage formula, the voltage gain of the part is 70dB .The maximal supply voltage of the comparator is 10.5V .This comparator can be supplied with a voltage as low as 9.5V .
MAX9691EUA+T Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB
MAX9691EUA+T Applications
There are a lot of Maxim Integrated MAX9691EUA+T linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Mobile Communications
- Motor drives
- Window Comparators, Multivibrators
- Mobile Phones and Tablets
- Set Top Boxes
- Self-diagnostics
- Appliances
- Window Comparators
- Security Detection Systems
