Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Max Power Dissipation |
727mW |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
MAX9692 |
Pin Count |
16 |
Output Type |
Complementary, ECL |
Number of Elements |
1 |
Power Supplies |
5-5.2V |
Nominal Supply Current |
26mA |
Output Current |
50mA |
Max Supply Current |
26mA |
Propagation Delay |
1.8 ns |
Quiescent Current |
26mA |
Response Time |
2 ns |
Common Mode Rejection Ratio |
60 dB |
Input Offset Voltage (Vos) |
6.5mV |
Neg Supply Voltage-Nom (Vsup) |
-5.2V |
Voltage Gain |
70dB |
Average Bias Current-Max (IIB) |
30μA |
Power Supply Rejection Ratio (PSRR) |
60dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
20μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Voltage - Input Offset (Max) |
6.5mV @ 5V |
Current - Input Bias (Max) |
20μA @ 5V |
CMRR, PSRR (Typ) |
80dB CMRR, 60dB PSRR |
Height Seated (Max) |
4.572mm |
Width |
7.62mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX9692EPE Overview
The product is packaged in 16-DIP (0.300, 7.62mm) for ease of transportation.The comparator has a Complementary, ECL output.This device is designed in Tube case.As you can see, the comparator has16 terminals.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical with Latch comparator.This is a 1 element comparator.The device contains 16 pins.The type of mounting recommended is Through Hole .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 16 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9692 .There is a quiescent current of 26mA in this comparator.The PCB or other board can be mounted using the Through Hole on it.For normal use of the device, the nominal supply current should be 26mA .A current supply greater than 26mA may result in the comparator malfunctioning.A power supply of 5-5.2V is sufficient for the operation of the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 70dB .
MAX9692EPE Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB
MAX9692EPE Applications
There are a lot of Maxim Integrated MAX9692EPE linear comparators applications.
- Threshold Detectors
- Laptop Computers
- Zero-Crossing Detectors
- RC Timers
- Notebooks and PDAs
- Building automation
- Zero-Crossing Detectors
- Automatic Test Equipment
- Portable and Battery-Powered Systems
- Alarm and Monitoring Circuits