Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Max Power Dissipation |
1.0667W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX9692 |
Pin Count |
16 |
Output Type |
Complementary, ECL |
Number of Elements |
1 |
Power Supplies |
5-5.2V |
Max Supply Voltage |
10.5V |
Min Supply Voltage |
9.5V |
Nominal Supply Current |
26mA |
Output Current |
50mA |
Max Supply Current |
26mA |
Propagation Delay |
1.8 ns |
Quiescent Current |
26mA |
Response Time |
2 ns |
Common Mode Rejection Ratio |
60 dB |
Input Offset Voltage (Vos) |
6.5mV |
Neg Supply Voltage-Nom (Vsup) |
-5.2V |
Voltage Gain |
70dB |
Average Bias Current-Max (IIB) |
30μA |
Power Supply Rejection Ratio (PSRR) |
60dB |
Max Input Current |
20μA |
Input Bias Current |
20μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Voltage - Input Offset (Max) |
6.5mV @ 5V |
Current - Input Bias (Max) |
20μA @ 5V |
CMRR, PSRR (Typ) |
80dB CMRR, 60dB PSRR |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX9692ESE Overview
Electronic comparator is packaged in 16-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a type Complementary, ECL output.The part is shipped by Tube .As you can see, the comparator has16 terminals.Electronic comparator is a part of Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.In general, the chip type can be classified as with Latch .Electronic comparator consists of 1 elements in total.Electronic comparator includes 16 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .In case you are looking for more pin-to-pin solutions, you may want to search MAX9692 .There is a quiescent current of 26mA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires 26mA supply current.If the current supply exceeds 26mA , the comparator might be damaged.A power supply of 5-5.2V is sufficient for the operation of the device.You can input a maximum current of 20μA into this device.The voltage gain of the part is indicated by 70dB in the voltage formula.In the comparator, the maximum supply voltage is 10.5V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 9.5V .
MAX9692ESE Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB
MAX9692ESE Applications
There are a lot of Maxim Integrated MAX9692ESE linear comparators applications.
- Zero-Crossing Detectors
- Alarm and Monitoring Circuits
- Threshold Detectors
- Handheld Instruments
- Battery management and protection
- Metering Systems
- Mobile Communications
- Building automation
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones