MAX9692ESE-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9692 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, ECL |
| Number of Elements | 1 |
| Power Supplies | 5-5.2V |
| Supply Current-Max | 36mA |
| Response Time | 2 ns |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Average Bias Current-Max (IIB) | 30μA |
| Supply Voltage Limit-Max | 6V |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 26mA |
| Voltage - Input Offset (Max) | 6.5mV @ 5V |
| Current - Input Bias (Max) | 20μA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 60dB PSRR |
| Current - Output (Typ) | 50mA |
| Propagation Delay (Max) | 1.8ns |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MAX9692ESE-T Overview
For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Complementary, ECL .As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has16 terminals.The chip belongs to Comparator .In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.A comparator of this type is typically of type with Latch .There are a total of 1 elements in it.The pinout of the component starts from 16 pins it has.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.In case you are looking for more pin-to-pin solutions, you may want to search MAX9692 .Electronic comparator is sufficient to run the device wElectronic comparatorh 5-5.2V power supplies.As a minimum current, this part can be powered by 36mA .
MAX9692ESE-T Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
MAX9692ESE-T Applications
There are a lot of Maxim Integrated MAX9692ESE-T linear comparators applications.
- Motor drives
- Automatic Test Equipment
- RC Timers
- Consumer Medical Electronics
- Wide Range VCO; MOS Clock Timers
- Point of load regulators
- Infotainment and Clusters
- Ultra-Low Power Systems
- Mobile Communications
- Lithium ion battery monitoring
