MAX9692EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 444mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9692 |
| Pin Count | 10 |
| Output Type | Complementary, ECL |
| Number of Elements | 1 |
| Power Supplies | 5-5.2V |
| Nominal Supply Current | 26mA |
| Output Current | 50mA |
| Max Supply Current | 26mA |
| Propagation Delay | 1.8 ns |
| Quiescent Current | 26mA |
| Response Time | 2 ns |
| Common Mode Rejection Ratio | 60 dB |
| Input Offset Voltage (Vos) | 6.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 20μA |
| Input Bias Current | 20μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 6.5mV @ 5V |
| Current - Input Bias (Max) | 20μA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 60dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9692EUB+T Overview
In order to facilitate transportation, it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .A comparator with an output type of Complementary, ECL is being used.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 10 terminals of the comparator.Other Comparators like the device play a important role in the industry.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical with Latch comparator.The total number of elements is 1 .Electronic comparator has 10 pins.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator is equipped with 10 pins.Search MAX9692 to find more pin-to-pin solutions.There is a quiescent current of 26mA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 26mA .An excess of current supply over 26mA could result in malfunction of the comparator.5-5.2V power supplies are enough to run the device.Input current to the device cannot exceed 20μA .According to the voltage formula, the part has a voltage gain of 70dB .
MAX9692EUB+T Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB
MAX9692EUB+T Applications
There are a lot of Maxim Integrated MAX9692EUB+T linear comparators applications.
- Battery-Powered Electronics
- General-Purpose, Low-Voltage Applications
- Wide Range VCO; MOS Clock Timers
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones
- Notebooks and PDAs
- System control and monitoring
- Battery management and protection
- Handheld Instruments
- General Purpose Low Voltage Applications
