MAX9693ESE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.0667W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX9693 |
| Pin Count | 16 |
| Output Type | Complementary, ECL |
| Number of Elements | 2 |
| Nominal Supply Current | 46mA |
| Output Current | 50mA |
| Max Supply Current | 46mA |
| Propagation Delay | 1.8 ns |
| Quiescent Current | 46mA |
| Response Time | 2 ns |
| Common Mode Rejection Ratio | 60 dB |
| Input Offset Voltage (Vos) | 6.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 20μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 6.5mV @ 5V |
| Current - Input Bias (Max) | 20μA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 60dB PSRR |
| Height Seated (Max) | 1.73mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX9693ESE Overview
A convenient transport package is provided in 16-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Complementary, ECL .This device is designed in Tube case.There are16 terminals on the comparator.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a with Latch chip.Electronic comparator has a total of 2 elements.The device contains 16 pins.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .Electronic comparator has 16 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX9693 .This comparator presents a quiescent current of 46mA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires a nominal supply current of 46mA .The compartator could be damaged if the current supply exceeds 46mA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 70dB .
MAX9693ESE Features
Complementary, ECL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 46mA
Voltage Gain: 70dB
MAX9693ESE Applications
There are a lot of Maxim Integrated MAX9693ESE linear comparators applications.
- Window Comparators
- Current and voltage sensing
- Laptop Computers
- Hand-Held Electronics
- High-Speed Sampling Circuits
- System control and monitoring
- Infotainment & cluster
- Multivibrators and High-Voltage Digital Logic Gates
- General-Purpose, Low-Voltage Applications
- Infotainment and Clusters
