MAX969EEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 457mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX969 |
| Pin Count | 16 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 22μA |
| Max Supply Current | 22μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 22μA |
| Turn On Delay Time | 10 μs |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 50nA |
| Input Bias Current | 50nA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height | 1.651mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX969EEE+ Overview
The product is packaged in 16-SSOP (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type Open-Drain, Rail-to-Rail output.The part is shipped by Tube .There are16 terminals on the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Speaking of types, this is a typical with Voltage Reference comparator.The total number of elements is 4 .Electronic comparator has 16 pins.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator consists of 16 pins.You can find more pin-to-pin solutions by searching MAX969 .The comparator displays a quiescent current of 22μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.For normal use of the device, the nominal supply current should be 22μA .A current supply greater than 22μA may cause the comparator to malfunction.The device can be powered by 1.5/5.5V power supplies.You are allowed to input a maximum current of 50nA into the device.
MAX969EEE+ Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 22μA
MAX969EEE+ Applications
There are a lot of Maxim Integrated MAX969EEE+ linear comparators applications.
- High-Speed Differential Line Receiver
- Notebooks and PDAs
- Zero-Crossing Detectors
- Zero-Crossing Detectors
- Security Detection Systems
- Body Control Modules
- Factory automation & control
- Set Top Boxes
- Motor drives
- Window Comparators
