MAX969ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX969 |
| Pin Count | 16 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 14μA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 22μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 50nA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 20μs |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX969ESE+ Overview
Electronic comparator is packaged in 16-SOIC (0.154, 3.90mm Width) for convenient transportation.Output type Open-Drain, Rail-to-Rail is used for this comparator.The part is shipped by Tube .The comparator has 16 terminals.The chip belongs to Comparators .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Speaking of types, this is a typical with Voltage Reference comparator.Electronic comparator has a total of 4 elements.The device is equipped with 16 pins.The type of mounting recommended is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 16 pins on the comparator.Try search MAX969 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 22μA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 14μA when using the device.A current supply greater than 14μA may cause the comparator to malfunction.1.5/5.5V power supplies are enough to run the device.
MAX969ESE+ Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 22μA
MAX969ESE+ Applications
There are a lot of Maxim Integrated MAX969ESE+ linear comparators applications.
- Automotive
- Security Detection Systems
- Metering Systems
- Zero-Crossing Detectors
- Wearable Devices
- Building automation
- Alarm and Monitoring Circuits
- Multivibrators and High-Voltage Digital Logic Gates
- Industrial
- Handheld Instruments
