MAX969ESE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX969 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.5/5.5V |
| Supply Current-Max | 0.022mA |
| Response Time | 20000 ns |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 22μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 20μs |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX969ESE Overview
Electronic comparator is packaged in 16-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a type Open-Drain, Rail-to-Rail output.The chip is packaged with Tube .The comparator has a total of 16 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical with Voltage Reference .A total of 4 elements can be found in it.The device is equipped with 16 pins.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .You can find more pin-to-pin solutions by searching MAX969 .A power supply of 1.5/5.5V is sufficient for the operation of the device.With this part, a minimum current of 0.022mA can be supplied.
MAX969ESE Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
MAX969ESE Applications
There are a lot of Maxim Integrated MAX969ESE linear comparators applications.
- Mobile Phones
- Analog front end
- Appliances
- Window Comparators
- Power management
- Lithium ion battery monitoring
- Portable Battery Monitoring
- Current and voltage sensing
- Point of load regulators
- Ultra-Low Power Systems
