MAX969ESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX969 |
| Pin Count | 16 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 22μA |
| Max Supply Current | 22μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 22μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 50nA |
| Input Bias Current | 50nA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 20μs |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX969ESE+T Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has a type Open-Drain, Rail-to-Rail output.The part is shipped by Tape & Reel (TR) .There are 16 terminals on the comparator.Other Comparators like the device play a important role in the industry.In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as with Voltage Reference .Currently, it consists of only 4 elements.The device is equipped with 16 pins.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.16 pins are present on the comparator.You can search MAX969 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 22μA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 22μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 22μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 1.5/5.5V power supplies.A maximum current of 50nA can be supplied to the device.
MAX969ESE+T Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 22μA
MAX969ESE+T Applications
There are a lot of Maxim Integrated MAX969ESE+T linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Alarm and Monitoring Circuits
- Analog front end
- Consumer Medical Electronics
- Hand-Held Electronics
- Portable Battery Monitoring
- Appliances
- Limit Comparators
- Battery-Powered Electronics
- Security Detection Systems
