MAX9700AEUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class D |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 444.4mW |
| Technology | BICMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9700 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Quiescent Current | 5.2mA |
| Output Power | 1.6W |
| Common Mode Rejection Ratio | 72 dB |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 20dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Max Output Power | 1.6W |
| Max Output Power x Channels @ Load | 1.6W x 1 @ 6 Ω |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9700AEUB+T Overview
There is a device embedded in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .Ideally, the chip should be packaged in a Tape & Reel (TR) case.In addition, there are 10 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.1-Channel (Mono) is used for its output.This electrical device has the type Class D .As part of the signal interface in a computer or other communication device, there are 10 pins.The electronic component is mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.5V~5.5V volts.Amp parts is equipped wAmp partsh 1 channels.When operating, it is possible to ensure Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.There are 10 pins on this device.Amp parts is included in Audio/Video Amplifiers .The MAX9700 family includes it.The chip should be mounted in the way of Surface Mount .This electronic component's maximum output power is 1.6W kWh per hour.The supply type of this electronic part is Single .The device consumes 5.2mA quiescent current and is unaffected by external influences.
MAX9700AEUB+T Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
MAX9700 family
1.6W kWh per hour
MAX9700AEUB+T Applications
There are a lot of Maxim Integrated MAX9700AEUB+T audio amplifiers applications.
- Proportional operation circuits
- High speed sample
- Power generator
- Active probe
- Vehicle electronics
- High-frequency data acquisition systems
- Medical imaging
- Test and measurement instruments
- Power control
- Automotive sensors
