MAX9700DETB+T
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.951W |
| Technology | BICMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9700 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 4mA |
| Quiescent Current | 5.2mA |
| Output Power | 1.2W |
| Common Mode Rejection Ratio | 72 dB |
| Bandwidth | 22 kHz |
| Voltage Gain | 20dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Max Output Power | 1.6W |
| Max Output Power x Channels @ Load | 1.6W x 1 @ 6 Ω |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
MAX9700DETB+T Overview
In the 10-WFDFN Exposed Pad package, it is embedded.Tape & Reel (TR) is the packaging method.10 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.The output it is configured with uses 1-Channel (Mono) .This electrical device has the type Class D .As part of the signal interface in a computer or other communication device, there are 10 pins.This electronic part is mounted in the way of Surface Mount .This electrical device is powered by 2.5V~5.5V volts.The chip is equipped with 1 channels.When operating, it is possible to ensure Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .The operating temperature should not exceed -40°C~85°C TA °C.A total of 10 pins are present on the device.Audio/Video Amplifiers contains it.The MAX9700 family includes it.In this case, the electronic part is mounted in the way of Surface Mount .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1.6W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.5.5V represents the maximal supply voltage (Vsup).This device runs on a power supply of 3.3/5V volts.The device consumes 5.2mA quiescent current
MAX9700DETB+T Features
10-WFDFN Exposed Pad package
10 pin count
MAX9700 family
1.6W kWh per hour
MAX9700DETB+T Applications
There are a lot of Maxim Integrated MAX9700DETB+T audio amplifiers applications.
- Information processing
- Comparator
- pH (acidity)
- Automotive sensors
- Proportional operation circuits
- Medical imaging
- Multiplication and division circuits
- Radar
- Professional videography
- Displayers for aircraft and air transportation control systems
