MAX9708ETN+TD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Class D |
| HTS Code | 8542.33.00.01 |
| Max Power Dissipation | 3.81W |
| Technology | BICMOS |
| Voltage - Supply | 10V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9708 |
| Pin Count | 56 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 10V |
| Number of Channels | 1 |
| Nominal Supply Current | 20mA |
| Quiescent Current | 20mA |
| Output Power | 21W |
| Common Mode Rejection Ratio | 70 dB |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 36dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Output Power | 42W |
| Max Output Power x Channels @ Load | 42W x 1 @ 4 Ω; 21W x 2 @ 8 Ω |
| Harmonic Distortion | 10% |
| Height Seated (Max) | 0.8mm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9708ETN+TD Overview
Amp parts is embedded in the 56-WFQFN Exposed Pad package.Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 56 termination.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) or 2-Channel (Stereo) .In this case, it is an electrical device of type Class D .As part of the signal interface in a computer or other communication device, there are 56 pins.The electronic part is positioned in the way of Surface Mount .Amp parts is powered by a voltage of 10V~18V volts.1 channels are present on the device.Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown can be ensured when operating.No temperature higher than -40°C~85°C TA should be used for operations.The number of pins is 56 .The MAX9708 family includes it.This electronic part is mounted in the way of Surface Mount .An electronic part such as this has a maximum output power of 42W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 10V .In this case, the maximum supply voltage (Vsup) reaches 18V .Single is the type of supply for this electronic part.20mA external influences affect the amount of quiescent current consumed by this device.
MAX9708ETN+TD Features
56-WFQFN Exposed Pad package
56 pin count
MAX9708 family
42W kWh per hour
MAX9708ETN+TD Applications
There are a lot of Maxim Integrated MAX9708ETN+TD audio amplifiers applications.
- Radar
- Band-stop filter
- Proportional operation circuits
- Integrator and differentiator circuits
- Signal filtering
- Signal transformation
- Proportional counter tubes
- High/low-pass filter circuit
- Broadcasting
- Signal operation
