MAX970EEE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 667mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX970 |
| Pin Count | 16 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 11μA |
| Max Supply Current | 11μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 18μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX970EEE Overview
Electronic comparator is packaged in 16-SSOP (0.154, 3.90mm Width) for convenient transportation.Output type Open-Drain, Rail-to-Rail is used for this comparator.We ship the part through Tube .There are16 terminals on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.This element consists of 4 elements in total.A total of 16 pins are included.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 16 .In order to find a solution that meets your specific needs, search MAX970 for more pin-to-pin solutions.The comparator presents a quiescent current of 18μA volts.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 11μA in order to use the device normally.The compartator could be damaged if the current supply exceeds 11μA .1.5/5.5V power supplies are enough to run the device.
MAX970EEE Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
MAX970EEE Applications
There are a lot of Maxim Integrated MAX970EEE linear comparators applications.
- Building automation
- Infotainment & cluster
- Alarm and Monitoring Circuits
- General-Purpose, Low-Voltage Applications
- Ultra-Low Power Systems
- Industrial
- Wireless Base Stations
- Lithium ion battery monitoring
- Power management
- Metering Systems
