MAX970EEE-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 667mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX970 |
| Pin Count | 16 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 11μA |
| Max Supply Current | 11μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 18μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX970EEE-T Overview
A convenient transport package is provided in 16-SSOP (0.154, 3.90mm Width) .A comparator with an output type of Open-Drain, Rail-to-Rail is being used.The part will be shipped by Tape & Reel (TR) .You can find 16 terminals of the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Electronic comparator can be classified as a General Purpose chip.In total, it contains 4 elements.The pinout of the component starts from 16 pins it has.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.16 pins are available on the comparator.You may wish to search MAX970 for more solutions that address your specific needs.There is 18μA current flowing in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 11μA in order to use the device normally.A current supply greater than 11μA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 1.5/5.5V power supplies.
MAX970EEE-T Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
MAX970EEE-T Applications
There are a lot of Maxim Integrated MAX970EEE-T linear comparators applications.
- Zero-Crossing Detectors
- Building automation
- Portable Battery Monitoring
- Portable and Battery-Powered Systems
- High-Speed Sampling Circuits
- Threshold Detectors
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Communications
- Consumer Medical Electronics
- Limit Comparators
