banner_page

MAX970ESD+T

Surface Mount Tape & Reel (TR) 20000 ns μs Linear Comparators 50nA pA 2007 11μA μA 7mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX970ESD+T
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 909
  • Description: Surface Mount Tape & Reel (TR) 20000 ns μs Linear Comparators 50nA pA 2007 11μA μA 7mV mV Surface Mount (Kg)

Details

Tags

Parameters
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 667mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3V
Terminal Pitch 1.27mm
Base Part Number MAX970
Pin Count 14
Output Type Open-Drain, Rail-to-Rail
Number of Elements 4
Power Supplies 1.5/5.5V
Nominal Supply Current 11μA
Max Supply Current 11μA
Propagation Delay 20 μs
Quiescent Current 18μA
Response Time 20000 ns
Common Mode Rejection Ratio 56.48 dB
Voltage - Supply, Single/Dual (±) 1.6V~5.5V
Input Offset Voltage (Vos) 7mV
Average Bias Current-Max (IIB) 0.005μA
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 6V
Input Bias Current 50nA
Current - Quiescent (Max) 18μA
Voltage - Input Offset (Max) 7mV @ 5.5V
Current - Input Bias (Max) 0.05μA @ 5.5V
Hysteresis ±1mV
CMRR, PSRR (Typ) 56.48dB CMRR, 80dB PSRR
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99

MAX970ESD+T Overview


The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with an output type of Open-Drain, Rail-to-Rail is being used.The part will be shipped by Tape & Reel (TR) .The comparator has 14 terminals.The electrical component here belongs to the Comparator family.A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.A total of 4 elements can be found in it.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator consists of 14 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX970 .The comparator presents a quiescent current of 18μA volts.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 11μA for normal use.A current supply greater than 11μA may result in the comparator malfunctioning.In order to operate the device, 1.5/5.5V power supplies are sufficient.

MAX970ESD+T Features


Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 18μA

MAX970ESD+T Applications


There are a lot of Maxim Integrated MAX970ESD+T linear comparators applications.

  • Zero-Crossing Detectors
  • Window Comparators, Multivibrators
  • System control and monitoring
  • Ultra-Low Power Systems
  • Wide Range VCO; MOS Clock Timers
  • Handheld Instruments
  • Notebooks and PDAs
  • Self-diagnostics
  • Zero-Crossing Detectors
  • Multivibrators and High-Voltage Digital Logic Gates

Write a review

Note: HTML is not translated!
    Bad           Good