MAX9718AEUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.951W |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9718 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 5mA |
| Quiescent Current | 5mA |
| Output Power | 1.4W |
| Common Mode Rejection Ratio | -60 dB |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Max Output Power | 1.4W |
| Max Output Power x Channels @ Load | 1.4W x 1 @ 4 Ω |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9718AEUB+T Overview
There is a device embedded in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.In addition, there are 10 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.Currently, amp parts is configured wAmp partsh 1-Channel (Mono) as the output.This electrical device has the type Class AB .This electronic part is mounted in the way of Surface Mount .In this electrical device, the supply voltage is 2.7V~5.5V .1 channels are available on the device.When operating, Depop, Differential Inputs, Shutdown, Thermal Protection can be ensured.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .This device has 10 pins.This part is included in Audio/Video Amplifiers .Amp parts is included in the MAX9718 family.Amp parts is recommended to mount the chip in the way of Surface Mount .In this electronic part, the output power is a maximum of 1.4W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.7V .There is a Single supply type on this electronic part.There is 5mA external influence on the consumption of quiescent current: it consumes 5mA of quiescent current.
MAX9718AEUB+T Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
10 pin count
MAX9718 family
1.4W kWh per hour
MAX9718AEUB+T Applications
There are a lot of Maxim Integrated MAX9718AEUB+T audio amplifiers applications.
- Communication
- Oscilloscopes
- Broadcasting
- Instrumentation
- pH (acidity)
- Precision measurement
- Communication device
- Signal transformation
- Test and measurement instruments
- High/low-pass filter circuit
